• Impact sound transmission testing according to ISO 10140-5. ISO 16283-2 and the old ISO 140-6, -7,-8 as well as ASTM E492 and ASTM E1007
• Determination of single number quantity index Ln,w, in accordance with ISO 717-2 and ASTM E-989
• Remote operation from hand switch or PC
• Mains or battery operation
• Powered from 85-264 volt AC main supply. Built in Lithium Ion rechargeable batteries.
• Battery capacity: Typical 1 hour with intermittent use and 45 minutes of continues operation.
• Battery de-rating: <5% loss in capacity per 100 discharge/charge cycles.
• Charging time: 2 hours
• Compact
• Low weight 10 kg (22 lb) incl. battery and wireless remote
• Rugged construction
• Five hammers each having a mass of 500 g falling from a height of 40 mm (adjustable)
• Tapping sequence of 10 impacts per second, rpm controlled via servo feedback loop
• Built in self check of hammer fall speed, and tapping sequence.
• Retractable feet
• Dimensions feet retracted: 165 x 230 x 495 mm (6,5 x 9,1 x 19,5″)
• Dimensions feet extended: 265 x 230 x 495 mm (10,4 x 9,1 x 19,5″)

Hammers: 5 hammers @ 500 g. Effective falling height 40 mm (adjustable)
Tapping sequence: 10 impacts per second, rpm controlled via servo feedback loop.
Power: 84 – 264 V, 47 – 63 Hz
Battery operation: Optional built-in Lithium-Ion rechargeable battery. 7.2V / 2350 mAh / 16,9 Wh
Battery capacity: Typical 1 hour with intermittent use and 45 minutes of continues operation.
Battery de-rating: <5% loss in capacity per 100 discharge/charge cycles.
Battery charging time: 2 hours
Power consumption: Less than 30 W
Dimensions: H x L x W: 230 x 495 x 165 (265 feet extended) mm. Add 50 mm to the height for handle.
Weight: 10 kg (22 lb) including battery and wireless remote option

Acc. incl.: Instruction manual, mains cable, small rod used for the verification of the fall height.
Optional acc.: Carrying case/Shipping case Nor1336

EMC compliance according to EN 50081-1 and EN 50082-1, Safety according to EN 61010-1-1993 and Machine directive 89/392